11
12
Operation
After select program, process and water level, press
this button to start.
Press this button to pause during working, press again
will rework .
Can select one program from NORMAL,HEAVY,SOFT,STANDARD,
FAST, WOOL,CHILD,FOAM CLEAN,TUB CLEAN and AIR DRY
At the beginning of start, the process is NORMAL.
To control the washing machine is in
working state or waiting state.
When washing, the digital timer shows
When trouble encountered, the digital time
shows trouble code.
Before washing, the digital timer
shows prest time, unit is HOUR.
If select AIR DRY, the digital timer
displays air dry time, unit is MIN.
the rest time of washing, unit is MIN.
At the beginning of start, press this button to select preset time from 2-24 hours.
If want to cancel preset time, press POWER to make the washing machine in
waiting state.
At the beginning of start, if with FUZZY logic and do not select water level, the digital timer
shows - -
at this time, before press START/PAUSE, If select NORMAL or HEAVY,
with fuzzy logic. When select STANDARD, no fuzzy logic, the water level is 7
When
select FAST, no fuzzy logic, water level is 2 . If no WASH process, no fuzzy logic.
During wash (including rinse), if need to add water, press WATER LEVEL button to add
water, un-press will stop adding. Or PAUSE the washing machine and press WATER
LEVEL to select higher water level, then press START/PAUSE button, The washing
machine Will add the water to setting level automatically and continue working. If your
resetting water level is lower than present water level, the lower water
Level will valid in
next water inlet.
At the beginning of start, press WATER LEV EL to select water level, at this time, no fuzzy
logic function, you can select appropriate water level. According to your laundries quantity.
1-2 is low water level, 3-6 is middle water level,7-10 is high water level.
If need to select air dry, please press "PROGRAM" button to select airy dry,then
press this button to set air dry time.
Automatically add water: during SOAK, WASH and RINSE process, if the washing
machine check the water level is lower than setting water level, The washing machine
will pause and add water to setting water level automatically.
At the beginning of start, if with FUZZY logic,
The digital timer shows -- .
Operation steps
Operation
1. Press power switch, put through power, the machine is in state of beginning:
4. Select appropriate water level according to your laundries quantity.
5. At the beginning of start, if need to select preset, please press PRES ET button and select
appropriate preset time, the preset time is shown in the digital timer, and the time
indicates the time to finish the whole washing. If want to cancel PRES ET, please press
POWER to make the washing machine in waiting state.
6. At the beginning of start, if need to select air-dry, press PROGRAM button and select AIR
DRY program,press PRES ET can select the time of AIR DRY. When the air dry function is
over, the washing machine will be in waiting state.
7. Close the top lid, press START/PAUSE , the washing machine is working. During working,
press WATE R LEVE L and PRES ET button, child lock function will start, press again,
unlock this function. If open the top lid, washing machine stop working and give an alarm.
8. When the washing is finished, buzzer alarm, power supply cut off automatically.
0
1
2
3
4
5
Times of pressing
the process button
Selected procedure
program
Applicable
procedure
Contents(the lighted indicator
indicate the programs about
to run)
Wash, rinse, spin
Soak, wash,
rinse ,spin
Wash
when use detergent
repeatedly
Wash light is on
Wash, rinse
Rinse ,spin
Spin
Standard program
For dirty laundries
No need to spin for
laundries creased easily
Wash by hand and
need to rinse and rinse
Wash by hand and
only need to spin
Wash rinse and spin
lights are on
Soak, wash, rinse and
spin lights are on
Wash and rinse lights
are on
Rinse and spin lights
are on
Spin light is on
Remarks: press PROCESS button continually, the above mode will be
cycled in turn.
2. Press program button to select proper program.
3. Press process button to begin process selection.
Operation steps
1). if there is no water in inner tub,washing machine is in state of "FUZZY",the state details
as per each model's button explanation. Now press "START/PAUSE" button (press
"PROGRAM" and select "STRONG",the washing machine is in state of "FUZZY"), the
washing machine will start fuzzy sensor and to sensor the weight of laundries and set
water level automatically.
2). If there is water in inner tub, washing machine is not in state of "FUZZY",the state details
as per each model's button explanation.. Now press "PROGRAM" and "PROCESS" to
select proper program and process.