09
10
Operation
It is suggested to use low foam washing powder
For the quantity of the concentrated washing powder, please refer to its manual
Remarks
avoid splashing of water and waste of washing powder, water level should not be too
high if laundries are too small.
Withdraw the dispenser box before adding detergent
Pour concentrated synthetic washing powder into
the box directly as shown in the left illustration.
The dosage of the washing powder, please refer to
below.
It is suggested to use low sud washing powder.
How to use the washing powder
Detergent box
How to use bleach
Fill water to the selected level,
dilute the bleach in the container,
and pour it slowly into the washing
tub.
Do not use bleach for colored or
figured laundries as they are prone
to lose colors.
Do not put bleach to laundries
directly.
Refer to the manual for the usage
and quantity of the bleach.
Please dissolve powder bleach
before use.
Use of detergent
Dissolve in the machine directly not suitable for
preset program
1. Low water level.
2. Add the washing powder, and run for 30 seconds
to dissolve it completely.
3. Put laundries in, select suitable water level.
The instant dissolving of the washing powder
1. Prepare warm water of 30 in a container.
2. Pour the powder while stirring to fully dissolve it.
The washing powder is more prone to pollute the
laundries than the detergent, therefore, please use
it with proper quantity.
Washing powder with poor quality or not used for a
long period may get blocked, please clean the
detergent box in time.
Use of detergent
Control panel instruction
Press this button to select one cycle from wash-rinse-spin
spin
soak-wash-rinse -spin
wash
wash-risne
rinse-spin
At the beginning of start, the process setting is wash-rinse-spin .
Mode and meaning of the indicator light
on: indicate the selected mode
flashing: indicate the program is running
At the beginning of start, pressing WATER LE VEL , at the same time press PRESET,
you can select WATER R ECYCLE, LOW NOISE , LOW NOISE-WATER RE CYCLE.
Only both RINSE and SPIN are selected, WATER R ECYCLE can be selected. Once
LOW NOISE is selected, program default setting is NORMAL and PROGRAM
button is locked.
During working, press WATER LEVEL and PRESET to set CHILD LOCK, press
again to unlock this function.
Additional functions
At the beginning of start state
Put through the power, press POWER b utton, the machine is in the state of beginning of start:
1. If no water in the inner tub, the washing machine is in state of FUZZY, the process is wash,
rinse, spin . The program is NORMAL ,digital timer shows -- , at this time, if press
START/PAUSE button(or press program to select HEAVY),the washing machine can
automatically set the water level according to the laundries quantity.
2. If there is water in the inner tub, and the machine is in state of non FUZZY, the water level setting
is 7 . Process is wash,rinse, spin
program is NORMAL .