Page 8
Wireless Repeater
grounding
your installation. For more information, contact your local lightning
protection authority and/or refer to the following articles:
✦
MIL-HDBK-419A:
Grounding, Bonding, and Shielding for Electronic Equipments and
Facilities,
29 Dec 1987.
✦
National Fire Protection Association, 1997:
Standard for Installation of Lightning Pro-
tection Systems,
1997 ANSI/NFPA 780, National Fire Protection Association, Quincy, MA.
✦
NEC,
National Electrical Code, 1996 Edition:
National Fire Protection Information,
Quincy, MA.
Mounting the AC-Power Model
Install the repeater in an attic or garage, or in one of Davis’s weatherproof shel-
ters.
1. Attach the base to the mounting surface using the #6 x 1” screws.
Use two screws (as pictured below) when attaching to a stud. Use three
screws (as pictured below) in any other case.
M
OUNTING
THE
B
ASE
OF
THE
AC-P
OWERED
R
EPEATER
2. Apply power (see step 3 on page 6).
3. Reattach the repeater cover to the base.
Make sure the tabs on top of the cover snap back into their slots, locking the
cover in place.
R
EATTACHING
THE
AC-P
OWERED
R
EPEATER
C
OVER
Use two screws if attaching
to a stud.
Use three screws if attaching
anywhere else.
#6 x 1" Screws
A
B