background image

INTRO

 

 

WIND 

This “Quick Reference Guide”

 will provide you with abbreviated 

instructions for all functions of the Vantage Pro2 console. For more de-
tailed instructions, see 

Vantage Pro2 Console Manual

.  

Pages with: 

 CLEAR 

 headings provide general instructions and information 

about the console. 

 BLACK 

 headings provide instructions for using each key. 

They are presented in alphabetical order. 

Whenever you see

 

"Press

 

 2

ND

 

 & 

 ANOTHER KEY  

"

 

in this booklet,

 

this means to press and release 

 2

ND

 

 and then immediately press the 

other key. 

REMEMBER: Press and hold 

 DONE

  at any time to return to 

the current weather screen. See DONE. 
For instructions about: 

 LEAF WETNESS, see “HUM.” 

 SOIL MOISTURE, see “TEMP.” 

 

Press

  WIND  

to toggle between:

 

 Wind Speed (0 mph, 0.0 m/s, 0 km/h, 0 knots) 

 Wind Direction (degrees) 

Press

 

 2

ND

 

 & 

 UNITS 

 

to change unit of measure.

 

On the compass rose: 

Current wind direction  

Dominant wind direction for a ten-minute period within the last 
hour. If dominant wind direction remained constant over the last 
hour, only one arrow will be shown. If dominant wind direction var-
ied, up to six arrows (representing six ten-minute periods) may be 
shown. 

Current wind direction is the same as one of the dominant wind 
directions.  

On the ticker tape: 

10 MIN AVG WIND SPEED . . . will appear on the ticker tape when you 
are displaying wind speed. 

 2 

 

31 

 

 

 

Содержание Vantage Pro2 Updater

















Отзывы: