22
Miscellaneous Information
To install a new battery, insert the battery as shown below.
Installing the Battery
A low battery can be replaced without losing the time or date settings, if it
is replaced within 20 seconds of the old battery being taken out. If the old
battery has a complete loss of power before it is replaced, make sure to
check the time and date settings once power has been restored.
When operating under battery power, the DriveRight 600
E
undergoes a
few changes in operation to conserve battery power:
• If it has been 5 minutes since a button was pressed, the DriveRight 600
E
enters “sleep mode.” In sleep mode, all but the most essential functions
(that is, time and date) are shut down. The display goes blank and no
data is recorded when the DriveRight 600
E
is “asleep.” To “wake up”
the device, press MODE or reconnect the device to a vehicle so it
receives power from the vehicle’s battery.
Note: The DriveRight 600
E
never goes into sleep mode when connected to the vehicle (i.e.,
receiving power from your vehicle’s battery).
• The display lamp is disabled.
• The GPS Latitude and Longitude Position Screens are not displayed.
The Latitude and Longitude Screens do not display when scrolling
through the DriveRight 600
E
Data Screens.
