Davis Instruments Health EnviroMonitor, Руководство пользователя

Страница: 20 / 60

Using the Health EM
Page 28 Health EnviroMonitor Manual
W
IND
You may select to display current wind speed and current wind direction (in
degrees) on the right side of the display. In addition, you may view the high
wind speed along with the direction of the gust and the time at which it
occurred. You may display wind speed in either miles per hour (MPH), Knots
(kts), kilometer per hour (km/h), or meters per second (m/s).
The Compass Rose
Wind speed and direction are also displayed in the compass rose on the left of
the display. The compass rose is divided into 16 points. Wind direction is indi-
cated by a flashing diamond at one of these points. Current wind speed and the
unit of measure in which wind speed is being displayed appear at the center of
the compass rose. The compass rose appears on the Health EM display at
almost all times (it does not appear when displaying UV or rainfall, for exam-
ple).
Viewing Wind Conditions
1. To display the current wind speed, press WIND.
The current wind speed appears on the right of the display.
C
URRENT
W
IND
S
PEED
2. To display the wind direction in degrees, press WIND again.
The wind direction reading, to a resolution of 1˚, appears on the right of the
display.
W
IND
D
IRECTION
3. To display the status of the AutoClear function for high wind speed, press WIND again.
If the AutoClear function is enabled, the word
O n
appears on the right of
the display. If the AutoClear function is disabled, the word
O F F
appears
on the right of the display. (See “Enabling/Disabling AutoClear” on page 46
for instructions.)
4. Continuing to press WIND will cycle through the wind displays in a continuous loop.