Davis Instruments DriveRight 600E Installation and user's guide..., Руководство по установке

Страница: 9 / 16

7
7. Use the in-line butt splices to connect the blue wires with fuses to the
Green (Digital Input 1) and Yellow (Digital Input 2) wires from the
adapter cable.
8. Connect Digital Input 1 to the desired circuit.
9. Connect Digital Input 2 to the desired circuit.
10.Connect the digital input cable to the OBD cable.
It is easiest to make the connection by first holding the OBD cable
connector by the housing. Then hold the adapter connector on the
cable itself next to the sliding connector housing and push the two
connectors together. The two cables will lock together when prop-
erly connected.
Note: To disconnect the cables, hold the both cables by the housing and pull apart. The
sliding housing on the adapter cable connector will release the lock and allow the
cables to be separated.
Procedure 3: Install the DriveRight Console
1. The DriveRight console can be mounted in a number of places,
including the top of the dash, on the face of the dash, or on a sun
visor. Some of the different mounting choices are illustrated below
and on the following page:
Face of Dashboard Mounting Options
S liding
Connector
Ho us ing
Ada p ter Cable OBD Cable
To Connect Cable s ,
Hold a s S ho w n Here
Mo u nting
Bracket
Do u ble- S ided
Foa m Ta p e
O R
Flat Head Self-Tapping Screw (2x)
Mo u nting
Bracket