Davis Instruments DriveRight 600E Installation and user's guide..., Руководство по установке

Страница: 8 / 16

6
1. If you are installing a DriveRight 600
E
OBD but not using the digital
inputs, go to Step 10 of this procedure.
2. Butt splice the red fuse holder to the red wire from the adapter cable.
3. Tap the red fuse holder to an unsw12 V source using the in-
line splice provided with your DriveRight or using a fuse tap con-
nector (not included) appropriate for your vehicle.
You can 12V from several places. Usually, you can easily
12V from the fuse box using a fuse tap connector (not sup-
plied) or using the supplied in-line splice connectors to tap into a
known circuit that does not involve safety related equipment such as
headlights, tail lights, air bag, etc. Possible candidate wires include
those from the cigarette lighter, dome light, glove compartment
light, clock, tail gate light, or other convenience functions.
If you are g12V from your fuse box, use a fuse tap connector
appropriate for your vehicle.
4. Butt splice the black ground wire from the adapter cable to black
ground wire included with your DriveRight.
5. Crimp a spade
terminal,
included with the
unit, to the other
end of the black
wire. Refer to the
illustration.
6. Connect the
spade terminal to
a vehicle chassis
ground.
Note: Use a multimeter to test the vehicle chassis ground before connecting to the
ground wire.
I n -Li n e Spli c e
U n swi tch e d
+12V
f ro m Ve h i c le
T r im o ff flus h
s tr ippe d wi r e
Re d +12V Wi r e wi th Fuse ho l d e r
Cri mp Tool,
22 - 1 8 A W G Po s ition
(red dot)
V ehicle
Gro u nd
Sp ade
Ter m inal
Black Gro u nd W ire
( 22 A W G)
3/ 1 6 - 1 /4"
(5 - 6 mm )