Davis Instruments DriveRight 600E Installation and user's guide..., Руководство по установке

Страница: 4 / 16

2
Cables
Wiring Components
Additional DriveRight Documentation
Refer to the following documents for information on configuring and
using your DriveRight:
• The DriveRight 600
E
User’s Guide included with your unit.
• The Online Help System in the DriveRight software.
• The
DriveRight FMS User’s Manual located in an Adobe Acrobat
PDF file in your DriveRight program directory.
Tools and Materials Needed
DriveRight installation may require some or all of the following tools
and materials. Please review the installation instructions and make sure
you have all necessary items before proceeding with the installation.
All Installations
• Electric Drill with 7/64'' (2.5 mm) Drill Bit - Used to drill the tap
holes for #6 self-tapping screws.
• Medium Phillips Screwdriver
• Pliers
OBD Cable
DriveRight
Adapter Cable
Black Ground Wire
(22AWG)
Red +12V Wire
with Fuseholder (22 AWG)
Blue Wire (2) with Fuseholder (22 AWG)
Spade Terminal Sets:
#8-10 Studs
(3.5 - 5 mm) 1/4" Studs
(6 mm)
Fuses (4)
(3AG 1-1/4 x 1/4",
.25A, Slo-Blo)
Insulated Male Disconnects
(18-22AWG)
In-Line Splice (3)
Butt Splices (5)
(26-22AWG or 24-20AWG)
T-Tap Disconnects:
Blue
(14-16AWG)
Red (3)
(18-22AWG)