Anemometer
Transmitter
Kit
Manual
Product
Numbers:
6332,
6332OV
Document
Part
Number:
07395.237
Rev.
C,
Manual
(8/21/12)
Vantage
Pro2™
and
Vantage
Vue®
are
trademarks
of
Davis
Instruments
Corp.,
Hayward,
CA.
Copyright
©
2012
Davis
Instruments
Corp.
All
rights
reserved.
This
product
complies
with
the
essential
protection
requirements
of
the
EC
EMC
Directve
2004/108/EC;
Low
Voltage
Directive
2006/95/EC;
and
Eco
‐
Design
Directive
2005/32/EC>0.5
watt
no
‐
load
adapter.
Davis
Instruments
Quality
Management
System
is
ISO
9001
certified.
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
E-mail: [email protected] • www.davisnet.com
®
FCC Part 15 Class B Registration Warning
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved in writing by Davis Instruments may
void the user's authority to operate this equipment.
