19
Davicom FMBM, Reference Manual, March 2015
19
4.2 Remote operation through Davicom unit
Using the supplied cable, connect your FMBM’s USB port to the back-panel USB Port on any
Davicom unit (DV-200, Mini and Micro).
Note that the Davicom units MUST be running
Firmware Version 5.42 or higher. If this is not the version of Firmware you have, please go to
the
www.davicom.com
web site for support.
Power-up the FMBM and wait a few seconds for it to automatically sync with the Davicom. To
connect to the FMBM through the Davicom, first connect to the unit in your usual way, start-
up DavLink and connect to your unit.
Once connected, click on the Configuration icon in the DavLink Toolbar:
The following MAC Configuration window will appear. Select the Devices Tab
Figure 7. Configuration window.
