Davey Spa Power SP800, Руководство пользователя

Страница: 20 / 44

20
7.3 User Timer
The user timer is a general-purpose countdown minute timer that can be preset to start at anywhere
between 1 and 99 minutes. You can set it when you get into the spa to have it remind you when it’s
time to get out.
The timer will count down the specified period and show minutes and seconds remaining on the LCD
Display as it does. A double beep is produced for each of the last 10 seconds, finishing with one long
beep and the message “USER TIMER FINISHED” when the timer is done.
To use the user timer, first select it from the main menu. The total time will flash on the LCD (default 30
minutes). Use the UP and DOWN buttons to adjust the time as required. Hold down either button for
automatic key press repeat. Press the SCROLL button once the desired time is reached. This will set
the timer running and the message “TIMER STARTED (STOP)” will be displayed. While this message
is being displayed you may immediately stop the timer by pressing SCROLL again. Otherwise wait
approximately five seconds for the message to disappear and you will be returned back to the default
view with the timer running in the background.
7.4 Clock
The SP800 contains a real time clock that will retain the correct time even during short power cuts. The
clock provides the user with a convenient way to tell the time and is also used to time sleep periods,
filtration timing and the user timers.
The clock can be configured to operate in either 12 or 24 hour mode. This setting will also determine
the way user alarms, sleep start and sleep stop times are displayed.