Davey Spa Power SP800, Руководство пользователя

Страница: 10 / 44

10
3.3 Pump 1 (Two speed, 24HR circulation pump fitted)
This pump is controlled via two touch pad buttons one to turn the pump on/off and another to change
its speed. The mode and pump speed selected by these buttons are shown for a few seconds on the
LCD display as well as being indicated by the pump button LEDs. The two pump button LEDs are
green, red or off when the pump is on-low, on-high or off.
Two pushes of the on/off button cycles the pump as follows:
Push 1 (Pump On)
Push 1 (Pump Hi)
The Hi/Low speed button can be used to change the pump speed:
Push 2 (Pump Low)
Push 2 (Pump Off)
LCD displays “PUMP OFF”, button LEDs off. The Hi/Low speed button has no effect in this mode.
3.4 Pump 1A & 1B
(Single speed pumps, no 24hr circulation pump fitted)
Three pushes of the Pump 1A button cycles the pump as follows:
Push 1 (Pump On)
LCD displays “PUMP ON”, button and Auto LEDs green.
Push 2 (Pump Off)
LCD displays “PUMP OFF”, button and Auto LEDs off.
Push 3 (Pump Auto)
LCD displays “PUMP AUTO”, button and Auto LEDs green.
Notes:
If Pump 1A is left in PUMP ON or PUMP OFF, this pump will automatically revert to “PUMP AUTO”
mode after 90 minutes.
Two pushes of the Pump 1B button cycles the pump as follows:
Push 1 (Pump On)
LCD displays “PUMP ON”, button LED green.
Push 2 (Pump Off)
LCD displays “PUMP OFF”, button LED off.
Notes:
1. If Pump 1B is left on, this pump will automatically switch off after 25 minutes.
2. If the heater element is on, running pump may cause the heater to load shed and switch off. If this
occurs the heater will come back on approximately 5 seconds after pump is deselected.