Davey AquaReviva DAR20C, Инструкция по установке и эксплуатации, Страница: 7 / 19

8
Do not use a double adaptor to connect more than one pump –
it can cause overload to the system and could void your warranty.
PRE-START UP PROCEDURE
Before operating your AquaReviva Pool Sanitiser System please ensure the following quantity of
Pool Salt (P/N: M3708-20) or mineral salt (P/N: EMSALT-15) and mineral activator (P/N: EMACT-15) has
been added to your pool.
POOL SALT
SALT LEVEL GUIDE – 20kg Bag
To raise salt
concentration by
Salt Required
ppm %
25,000L
Bags / kg
30,000L
Bags / kg
35,000L
Bags / kg
40,000L
Bags / kg
45,000L
Bags / kg
50,000L
Bags / kg
55,000L
Bags / kg
60,000L
Bags / kg
65,000L
Bags / kg
70,000L
Bags / kg
1000 0.1 1.3 / 26 1.5 / 30 1.8 / 36 2.0 / 40 2.3 / 46 2.5 / 50 2.8 / 56 3.0 / 60 3.3 / 66 3.5 / 70
2000 0.2 2.4 / 48 2.8 / 56 3.3 / 66 3.7 / 74 4.2 / 84 4.6 / 92 5.1 / 102 5.5 / 110 6.0 / 120 6.4 / 128
3000 0.3 3.6 / 72 4.4 / 88 5.1 / 102 5.9 / 118 6.6 / 132 7.4 / 148 8.1 / 162 8.9 / 178 9.6 / 192 10.4 / 208
4000 0.4 5.0 / 100 6.0 / 120 7.0 / 140 8.0 / 160 9.0 / 180 10.0 / 200 11.0 / 220 12.0 / 240 13.0 / 260 14.0 / 280
5000 0.5 6.3 / 126 7.5 / 150 8.8 / 176 10.0 / 200 11.3 / 226 12.5 / 250 13.8 / 276 15.0 / 300 16.3 / 326 17.5 / 350
6000 0.6 7.3 / 146 8.8 / 176 10.3 / 206 11.8 / 236 13.3 / 266 14.8 / 296 16.3 / 326 17.8 / 356 19.3 / 386 20.8 / 416
STORAGE AND SAFETY
1. Store in a dry, covered place away from direct sunlight for longer bag life
2. Always use the entire bag content of Salt, once opened. Do not keep open bags of Pool Salt, as it is sensitive
to moisture in the air.
3. Care should be taken to avoid contact with eyes and inhaling salt dust. Wearing eye protection and a dust mask is
good practice.
4. ,IH\HVEHFRPHDIIHFWHGÀXVKZLWKFOHDQWDSZDWHU
5. If skin becomes irritated, immediately wash contaminated skin with plenty of water and then wash with soap
and water.
• CHLORINE )RUDQHZSRROLQVWDOODWLRQWKDWKDVQRWEHHQFKORULQDWHGDGGVXI¿FLHQW&KORULQHOLTXLGRU
granular) to achieve a reading of 3 ppm (with a suitable test kit), or run the Sanitiser system continuously for at
least 24 hours or until a reading of 3 ppm is reached.
• STABILISER - It is essential that pool stabiliser be added and maintained at the rate of 30 - 50 ppm at all times.
Do not exceed 100 ppm. (FOR OUTDOOR POOLS ONLY)
• (Refer Day to Day Operation page 16 for further information).
Sanitiser’s plug
and socket
Pool pump’s
3 pin plug
403165_AquaReviva_I&OI.indd 8 4/7/17 9:18 am