
6
INSTALLATION INSTRUCTIONS FOR AquaReviva
INSTALLING THE POWER SUPPLY
6HOHFWDFRQYHQLHQWZHOOYHQWLODWHGORFDWLRQZLWKLQRQHPHWUHRI¿OWHUHTXLSPHQWDQGPRXQWWKH3RZHU6XSSO\
vertically onto a post or wall 1.5 metres above ground level. Australian Standards requires that the Power
Supply shall not be located within 3 meters of the pool water. Plug Power supply into a suitable weatherproof
outlet and plug pump into the power outlet of the Power Supply Unit. The Unit must be kept away from acid
and other chemical storage areas. Acid and chemical vapours will corrode the electronics inside the Unit.
It must also be kept away from heat sources. Good ventilation is necessary for correct operation.
Return to pool line
Suction Line
PUMP
FILTER
ACCESSORIES
IN-LINE CELL
FLOW SWITCH
POWER SUPPLY
240V
Two self-tapping screws and wall plugs have been provided for fast and simple installation.
8VHDPPPDVRQU\GULOOELWZKHQ¿WWLQJ3RZHU6XSSO\WRDEULFNRUFRQFUHWHZDOO:KHQPRXQWLQJWRDSRVW
GULOOSLORWKROHVDQG¿WVFUHZVSURYLGHG2QFHVFUHZVDUHLQSRVLWLRQVLPSO\KDQJ6DQLWLVHUYLDEUDFNHWRQ
back of Unit.
IMPORTANT: This diagram is intended to
conform with SPASA for the safe operation of salt
sanitisers. Any deviation is at the installer’s risk
and may void the manufacturer’s warranty.
127(7KHFHOOPXVWEH¿WWHGWRDOORZIRUHDV\
removal and cleaning, and positioned after all
accessories such as heater or pool cleaner, but
before it divides if there is more than one return
to pool line.
403165_AquaReviva_I&OI.indd 6
4/7/17 9:18 am
®
Rainbow Pool Products
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: [email protected]
Web: www.rainbowpoolproducts.com.au