manualshive.com logo in svg

Dave Embedded Systems SBC AXEL, Руководство пользователя

Поделиться
Скачать
Dave Embedded Systems SBC AXEL Скачать руководство пользователя страница 135

S B C X   U s e r ' s   G u i d e

v . 1 . 0 . 1

[    0.473248] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.473272] PTP clock support registered
[    0.489025] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    0.509018] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    0.509846] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_19 already requested by 20e0000.iomuxc; cannot claim 
for 21dc000.mipi_csi
[    0.509863] imx6q-pinctrl 20e0000.iomuxc: pin-149 (21dc000.mipi_csi) status -22
[    0.509876] imx6q-pinctrl 20e0000.iomuxc: could not request pin 149 on device 20e0000.iomuxc
[    0.509889] mxc_mipi_csi2 21dc000.mipi_csi: Error applying setting, reverse things back
[    0.509956] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
[    0.509968] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
[    0.510033] MIPI CSI2 driver module loaded
[    0.510161] Advanced Linux Sound Architecture Driver Initialized.
[    0.510885] Bluetooth: Core ver 2.16
[    0.510929] NET: Registered protocol family 31
[    0.510937] Bluetooth: HCI device and connection manager initialized
[    0.510956] Bluetooth: HCI socket layer initialized
[    0.510969] Bluetooth: L2CAP socket layer initialized
[    0.511000] Bluetooth: SCO socket layer initialized
[    0.511284] cfg80211: Calling CRDA to update world regulatory domain
[    0.512210] Switching to clocksource mxc_timer1
[    0.753556] imx6q-pcie 1ffc000.pcie: phy link never came up
[    0.753755] PCI host bridge to bus 0000:00
[    0.753776] pci_bus 0000:00: root bus resource [io  0x1000-0x10000]
[    0.753788] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[    0.753804] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.755206] PCI: bus0: Fast back to back transfers disabled
[    0.756055] PCI: bus1: Fast back to back transfers enabled
[    0.756266] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[    0.756313] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref]
[    0.756327] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.765607] NET: Registered protocol family 2
[    0.766225] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.766597] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.766958] TCP: Hash tables configured (established 16384 bind 16384)
[    0.767178] TCP: reno registered
[    0.767198] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.767303] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.767691] NET: Registered protocol family 1
[    0.768039] RPC: Registered named UNIX socket transport module.
[    0.768052] RPC: Registered udp transport module.
[    0.768059] RPC: Registered tcp transport module.
[    0.768066] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.768603] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.769502] pureg-dummy: no parameters
[    0.770453] imx6_busfreq busfreq.15: DDR medium rate not supported.
[    0.770899] Bus freq driver module loaded
[    0.777544] VFS: Disk quotas dquot_6.5.2
[    0.780105] NFS: Registering the id_resolver key type
[    0.780157] Key type id_resolver registered
[    0.780166] Key type id_legacy registered
[    0.780206] NTFS driver 2.1.30 [Flags: R/W].
[    0.780614] fuse init (API version 7.22)
[    0.781002] msgmni has been set to 3199
[    0.782370] io scheduler noop registered
[    0.782381] io scheduler deadline registered
[    0.782414] io scheduler cfq registered (default)
[    0.782678] imx-weim 21b8000.weim: WEIM driver registered.
[    0.784346] MIPI DSI driver module loaded
[    0.785224] mxc_sdc_fb fb.23: register mxc display driver ldb
[    0.785247] mxc_ldb 20e0000.ldb: change IPU DI1 to IPU DI0 for LDB channel0.
[    0.785460] mxc_sdc_fb fb.23: using reserved memory region at 0x8f600000, size 1 MiB
[    0.785474] mxc_sdc_fb fb.23: assigned reserved memory node splashscreen
[    0.785486] mxc_sdc_fb fb.23: using memory region 0x8f600000 0x8f776fff
[    0.827938] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[    0.828742] imx-sdma 20ec000.sdma: loaded firmware 1.1
[    0.831117] imx-sdma 20ec000.sdma: initialized
[    0.832576] pfuze100-regulator 0-0008: Full lay: 2, Metal lay: 1
[    0.833178] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
[    0.833191] pfuze100-regulator 0-0008: pfuze100 found.
[    0.834616] SW1AB: 300 <--> 1875 mV at 1150 mV 
[    0.836536] SW1C: 300 <--> 1875 mV at 1175 mV 

December, 2019

135/139

Содержание SBC AXEL












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды