Dave Embedded Systems SBC AXEL, Руководство пользователя

Страница: 115 / 139

S B C X U s e r ' s G u i d e v . 1 . 0 . 1
SF: Detected S25FL256S with page size 64 KiB, total 32 MiB
In: serial
Out: serial
Err: serial
Power: found PFUZE100 (devid=10, revid=21)
HW ver#: 0x1 (module_id)
HW ver#: 0x0 (sbc_id)
Net: FEC
Normal Boot
Hit any key to stop autoboot: 0
Once the boot process has completed, you'll get the default Android
graphical user interface.
Moreover, you'll have immediate access to the Android shell, so you can
use the shell commands to interact with the system and see the output
messages on the console. Using the serial console doesn't prevent you
from using also the adb tool to access the system.
7.7.2.2 Running in "Normal" mode
1. connect the SBCX (RJ45 connector, J16) to the same Ethernet
LAN of your PC
2. power up the board
Once power has been applied, the system will boot loading the software
components from the storage media. Once the boot process has
completed, you'll get the default Android graphical user interface
"desktop".
You can now access the system using adb.
7.7.2.3 Network setup
Launch the following commands from the Android console to set a static
ip address and configure the system to surf the internet:
root@sbcx:/ # ip addr add <ip-address>/24 dev eth0
root@sbcx:/ # ip link set eth0 up
root@sbcx:/ # route add default gw <gateway ip address> dev eth0
root@sbcx:/ # ndc resolver setifdns eth0 "" 8.8.8.8 8.8.4.4
root@sbcx:/ # ndc resolver setdefaultif eth0
December, 2019
115/139