!
!
Setting Up
6
B
A
20 levels
safety button
B
star knob
(or M8x40 screw )
Ear clip
Cardio Sensor-chest
strap correctly put
on
Cardio Sensor-Strap
Handlebars adjustment
Loosen the clamp by means of the star knob
A
(on the rear side of the handlebars
column/small illustration), then loosen the spring loaded knob
B
by 1 to 2 turns
and pull it out. Adjust the now unlocked handlebars to the required length.
Release the knob and move the handlebars column a little up or down until the
protruding red safety button of the knob clicks in. Then tighten the knob back.
Finally tighten the clamp of the handlebars by mean of star knob A.
For safety reasons, the highest length setting allowed is limited to level
20!.
Notes about Pulse Rate Measure
Ear Pulse Rate Measure
Every heart pulse modulates the light passing through the lobe, and can thus
be detected by an infrared sensor in the ear clip, and displayed as heart pulse
rate. The measure of the pulse rate over the ear is much more precise than the
measure over the hand sensor.
Please make sure that the ear clip is correctly put on:
1. Insert the connector into the Cardio socket.
2. You should rub the ear lobe to stimulate blood circulation.
3. Attach the ear clip to the ear lobe (the closest possible to the head). The
contact surfaces must sit entirely on the skin.
The scattering in the display of the pulse rate variability is larger than with the
wireless pulse measure (factor 2).
Note: Strong light sources, like sunlight, halogen projectors,
and neon lamps, and also ear piercing or ear rings, or the
intake of beta-blocker could affect the measurements.
Wireless Pulse Measure
The Cardio sensor chest strap transmits the pulse rate directly to the integrated
wireless Cardio pulse receiver in the device. This pulse measurement method
is the most precise.
We recommend using the wireless pulse rate measure !
Note: Your pulse rate will be correctly evaluated over the whole measuring
range only if you use a non-coded wireless pulse rate transmitter.
To ensure the maximum efficiency of the Cardio sensor strap, you should lightly
humidify the contact surfaces (inner side) of the chest strap before starting the
training.
Note: Using two chest straps simultaneously in the same room,
either of the coded or non-coded type, at about 1.5 meter from
the receiver, can lead to the display of a wrong pulse rate.
Note:
When you train without ergo_memo-card2 you will not have the possibility to
store training results.
When you train without pulse rate measure, the pulse rate will not be displayed!
The user controls the dashboard by means of the control button, the Menu
key, the Info key and the two function keys.
Use the Info key to obtain more information about the individual menu
items.
If the request information spans many pages, you can leaf through the pages
by turning the control button. Press the Info key to display the keywords glossary
(page 21).
All manuals and user guides at all-guides.com
all-guides.com