DATSUMO Labo Home Edition, Инструкция по эксплуатации

Страница: 12 / 20

CAUTION
Turn off the power, unplug the power cord, and allow the product to cool.
*The glass surface will become hot during use. Always allow it to cool it
down first before cleaning the glass surface.
Use a damp cloth that has been tightly
wringed to remove excess water and
clean the following parts.
How to Maintain / Store the Product
Storing the Product
Glass Surface
Irradiation Surface (Glass Surface)
The metal frame of the glass surface
If the small crevices of the irradiation surface is difficult to clean, using a
cotton swab is plausible but be careful not to leave any fibers on the surface.
If necessary, wipe the product with a dry cloth.
Wipe off the dirt on the main unit with a dry cloth. Wipe off hard-to-remove
dirt with a damp cloth and wipe off the water. Do not immerse the product
in a liquid or rinse it with water as it may seriously damage the product.
Never use compressed air, polishing pads, polishing cleaners, corrosive
liquids such as gasoline or acetone.
Do not get the power adapter wet.
Do not scratch the glass surface or the metal parts inside it.
Do not use this product if it is not possible to clean the glass surface.
Turn off the power, unplug the power cord, and allow the product to cool down.
Clean the product.
Store it in a place that has minimal dust, minimal moisture and temperature
range of 0 to 40 ° C. Please avoid places with dust and moisture.