Datron TW7201I, Руководство пользователя

Страница: 39 / 106

3: Operation
TW7201I-MS 3-15
•
3
for channel setup (
CH Rx/Tx
) of the RC2 software.
(5) SELF ADRS
For selecting an address number to review, change, or
add for this station (from 00 to 19).
1. To enter a new self address, enter the number.
2. To change an existing address, scroll to the number,
then enter a new one.
(6) SELF NAME
For entering a new self address name for the address
number selected in
(5) SELF ADRS
. Any existing
address name is briefly displayed.
1. Use the alpha characters on the keypad to enter from
3 to 15 characters (no spaces or punctuation).
2. To delete a name enter three periods (
...
).
(7) OTHR ADRS
For selecting an address number to review, change or
add for a station where messages are sent (from 00 to
99).
1. To enter a new other address, enter the number.
2. To change an existing address number, scroll to the
number, then enter a new one.
(8) OTHR NAME
For entering a new or different name for the other
address selected in
(7) OTHR ADRS
. Any existing other
address is briefly displayed.
1. Use the alpha characters on the keypad to enter from
3 to 15 characters (no spaces or punctuation).
2. To delete a name enter three periods ( ... ).
(9) MOD GRP
For modifying or defining channels to include in a scan
group.
1. Scroll to the channel to set.
2. To include a channel in a scan group, enter
1
(
ON
).
3. To remove a channel from a group enter
2
(
OFF
).
(10) SND SELCT
For enabling or disabling sounding. Enter
1
for
sounding
OFF
and
2
for sounding
ON
.
(11) SND ADRS
For setting the sounding feature to the self address
selected in
(5) SELF ADRS
.
(12) SND LEN
For setting the length of each sounding transmission.
The recommended sounding length is 5 or 10 seconds.
(13) SND INT
For setting the time intervals for sounding. Enter from
1 minute to 24 hours (0001 to 1439 minutes).