Datron TW7201I, Руководство пользователя

Страница: 33 / 106

3: Operation
TW7201I-MS 3-9
Alpha Menu
Descriptions
Note:
These functions only apply if the 7000TC option is installed. The
exception is function
Alpha 17
which allows access to the 7000ALE option.
(1) OPTION
Not currently available.
(2) SCAN SET CHANNEL
For customizing the selected scan group (selected with
ALPHA 15
). For more information on how to use this
function, refer to Section “Customizing a Scan Group”
on page 3-21.
(3) SCAN RATE
For setting the rate at which channels within a selected
scan group are scanned. Enter a speed between 1 and
30 seconds per channel.
(4) PRIORITY CHANNEL
For changing the number of the priority channel. The
default is channel 1. To change the priority
channel:
1. Press
ALPHA 4
and
E
. The existing priority channel
is displayed.
2. Enter the new priority channel number, then press
E
.
The new priority channel number is displayed.
3. Press the
PRI
button to set the new priority channel.
(5) RF POWER
For changing RF power output settings of the TW7000.
The defaults for the three power output levels are 10,
30, and 200. To change a value:
1. Connect a power meter to the antenna connector on
the rear of the TW7000.
29 PRINTER.
30 CLONE RADIO.
31 GLOBAL POSITION SYSTEM (optional).
32 CW HOLD TIME.
33 SPLIT SITE (2 radios: TX and RX).
34 CLARIFIER ON/OFF.
35 100 CHANS
Table 3-1 Alpha Menu (continued)
ALPHA
Function Description