manualshive.com logo in svg

Datron PRC1077, Руководство оператора

Поделиться
Скачать
Datron PRC1077 Скачать руководство пользователя страница 26

2: Installation

2-14

PRC1077-MSOP

5. Connect the C991658 cable to the AM-1077 RF amplifier DC POWER 

INPUT connector and to the MT-1077-12 adapter AMP CNTL connector 
(J3).

6. On the PRC1077, remove the protective cap from the POWER connector. 

Connect the C991949 cable to the PRC1077 POWER connector and to 
the MT-1077 SET PWR connector (J4).

Note: 

Make sure the POWER connector protective cap is attached to the 

PRC1077 transceiver front panel by a cord so it will not become lost. The 
protective cap grounds the connector when the cap is installed. If the 
protective cap is not installed or the C991949 cable is not installed and 
connected to the MT-1077 adapter, the PRC1077 will not operate.

7. Connect the C991577 cable to the AM-1077 RF amplifier 50 ohm RF 

OUT connector and to the 4242-MK2 antenna.

8. Connect the C991580 cable to the MT-1077-12 adapter J1 connector (on 

backside), then to a 12 Vdc power source.

9. Remove the rubber protective cap from the dual AUDIO connectors and 

connect a military handset (MHS either H-189/U or M-250/U) to one of 
the connectors.

Содержание PRC1077





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды