2: Installation
2-4
PRC1077-MSOP
To mount the transceiver and harness on the operator:
1. Install either a AT-892/U or AT-271A/U antenna.
2. Connect the handset to one of the audio connectors on the transceiver
front panel.
3. Place the harness, with the transceiver attached, on the operator's back.
Place the shoulder straps over the operator's shoulders.
4. Feed the end of the lower strap through the right shoulder strap ring.
Feed
the metal tip of the strap from below, through the center slot in the buckle,
then down through the end slot.
5. Install the left should strap in a similar manner to Step 4.
6. Hook the two belt straps to the combat belt.
Figure 2-2. Manpack Components
Shoulder straps
Transceiver
Retaining
Straps
Shoulder
Strap
Buckle (2)
Shoulder strap ring (2)
Cotton Duck
Bag
Lower
Strap (2)
Metal Braces
Belt Strap (2)
Retaining Strap
Buckles (2)
