background image

PRC1077-MSOP

2-1

CHAPTER 2 

INSTALLATION

Unpacking

The PRC1077 is shipped in a heavy-duty corrugated cardboard carton with the 
accessories packed in a separate carton. Do not discard the cartons and packing 
materials in case the equipment needs to be reshipped. 

Inspect the equipment for possible damage during shipment. Check all 
accessories against the packing list.

Location Considerations

Manpack and 
Fixed Base 
Applications

The PRC1077 operates at high frequencies with low power so the equipment 
location can greatly affect its operating range. Typically, if the other station can 
be seen (line of sight), the PRC1077 can provide good communication. An 
intervening hill or a tall building may hamper or prevent contact with other 
stations. Valleys and densely wooded areas also impair communication quality. 
Positioning the transceiver on a hilltop or a tower increases the operating range. 
If possible, avoid locations near a source of electrical interference, such as 
power or telephone lines, radar sets, and hospitals.

Manpack Installation

The PRC1077 manpack configuration includes the following equipment:

Part Number

Description

PRC1077

VHF/FM Transceiver, 30 to 87.975 MHz, 5/50W

AT-892/U

Whip antenna, 1.2m (3.9 ft.), flexible

AT-271A/U

Whip antenna, 3m (10 ft.), with AB591/U flexible base

BB-LA6

Battery, rechargeable, 6 AH

LC-2

Lightweight tubular backpack

MHS

Military Handset, H-189/U-type or H-250/U military 
style

Содержание PRC1077





















































Отзывы: