Datron neo, Инструкции по установке

Страница: 19 / 25

Safety regulations for operating the machine
Dry machining
4
Setup instructions neo
1.21 DATRON AG 4-1
4 Safety regulations for operating the machine
The following points are an excerpt from the operating
instructions. Please observe the complete operating instructions
when operating the machine.
4.1 Dry machining
In dry machining, the material is machined without the cooling
spray function. The released dusts must be suctioned by a
deduster.
WARNING
Damage to health due to harmful dusts!
When dry machining materials, dusts which are harmful to health
can be released.
■
For this, observe the information on the safety data sheet of the
respective material.
■
In the case of harmful dusts, you must use a suitable vacuum
cleaner.
CAUTION
Machine damage due to released dusts!
During machining, the dusts that are released have to be suctioned
off by a suitable vacuum cleaner.
■
Check the compatibility of the vacuum cleaner and the material
to be machined.