a. Insert the interior handle from the other side of the door
by aligning the quad slot with the spindle (remember to
insert the rubber pad in advance).
b. Tighten and secure the rear handle with two mounting
screws into the screw holes of the connecting screws
coming from the front handle.
7 Finishing the Installation
a. When the front (exterior) handle is turned， the door should be tightly locked without the fingerprint input for
identification. Upon correct and authorized fingerprint input， the door should open successfully when turning the
door handle.
Note: If you find that fingerprints could not be identified after setting up a fingerprint (fingerprint record failed)，
please refer to the instruction book to do fingerprint registration again.
b. Turn the internal (interior) handle - then should open.
8 Test after the installation
7
Need Help? Contact Customer Support
Visit: https://www.datoaihome.com/pages/technical-support.
Email: [email protected].
Note: Please fix the screws near door frame firstly，
then turn the handle to fix the other one.
Содержание L-B200
Страница 1: ...User manual E S ...
