User's Manual DTX-200
E-mail : [email protected]
Website: www.datex-dsm.com
_______________PARC D'ACTIVITES DE VILLEJUST - 9, place Marcel Rebuffat - 91971 COURTABOEUF CEDEX / FRANCE____________
S.A.S. au capital de 160. 000 € - R.C. EVRY B 331 142 018 - SIRET 331 142 018 00026 - APE 725Z- Int. VAT n° FR 81 331 142 018
Edition: May 2013
6
Precaution
Make sure you have taken all necessary preliminary safety precautions described
below before using the DTX-200:
The emulator must be ready before beginning any operation.
A “low level” formatting is necessary when using a Compact FLASH card for the first
time on the emulator.
Moreover, the standard Compact FLASH™ is formatted 2HD PC or 2DD.
Rotation speed : 300RPM (200ms)
Same controls
Your system will perform exactly like before if not faster because of the Compact
Flash fast data transferring capabilities.
You can send the same commands as you would have done with an old floppy
drive. The LED "Select" lights permanently on a selection chosen. The LED turns on
and off with on every access and will remain off when there is no access to the CF.
WARNING:
The DTX200 works only with a custom compact flash. Our compact flash
has been specially design to be hot swap. Note that the use of any other compact may
damage the DTX200 permanently. Warranty will not take charge if the DTX200 is damage
when using another compact flash.
* CF: Compact Flash
II – U
SE THE DTX-200
