Datcon DT9102 I4, Руководство по эксплуатации

Страница: 30 / 64

DT9102 I4
30
20220103-V0
7.7.
Synchronisation time
(05. menu item)
Function
Setting remote synchronisation time. When in

menu item

is selected the clock will set at this time.
Sequence of operations 1. Enter the menu by typing the supervisor code.
The way the code should be type in is described in Chapter
7.1. Typing the code (password) in. You see on the
display:

2. Keep stepping by pressing the ▲ button as long as you
see this menu item:

.
3. Enter the menu item by pressing the ENTER button.
4. You see the actual synchronisation time on the display.
5. Pressing the
▲ button you can increase the value of the
blinking digit:

,

,

,

,

,

,

,

,

,

, etc.
•
Pressing the ► button you can select the next digit, so
you can set all the four digits. (after digit 4 comes digit 1)..
Exit from the menu item 1. After finishing the setting, press the MENU button, to exit
from the menu item, and you see this:

.
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3 of the
Sequence of
operations .)
(3. If you don’t want to exit the menu, as you want to do
further settings, then you may select the desired menu
items by pressing the
▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.