Datcon DT9102 I4, Руководство по эксплуатации

Страница: 25 / 64

DT9102 I4
20220103-V0
25
7.3. Time set (01. menu item)
Time set either with setting the seconds to zero or not.
1. Enter the menu by the user or the supervisor code.
Chapter
7.1. Typing the code (password) in describes
how you can type the code in. You see on the display:

.
2. Enter the given menu item by pressing the ENTER
button.
3. You can read the mnemonic

on the display for
2,5 second, then appears the time in MM.SS format. The
decimal point is blinking.
4. Press the
▲ button to set the seconds to zero.
Between 0–29 seconds will round down, between 30–59
seconds will round up.
5. Press MENU button to set the time (if no need to set
seconds to zero).
First you can set the hours:
Press the
▲ button to increase the hours, press the ENTER
button to decrease the hours.
6. Press the MENU button, now you can set the minutes:
Press the
▲ button to increase the minutes, press the
ENTER button to derease the minutes.
While setting the time the clock continues to count the
seconds. It is a useful function when you set the clock from
winter time to summer time or vice versa.
Exit from the menu item 1. After finishing the settings, press the MENU button to exit
from the given menu item, and you see:

.
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 2 of the
Sequence of
operations .)
(3. If you don’t want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the
▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.