Datcon DT9100 I4, Руководство по эксплуатации

Страница: 40 / 64

DT9100 I4
Sequence of operations 9. If the codes type in for the first and second time are
identical with each other, the instrument exits from the
menu item. You see this

on the display.
Do not forget the supervisor code you have specified. If you
forget it, defining another one is possible in the service only.
Returning into the menu
item Changing the
supervisor code 1. As you have already left the menu item Changing the
supervisor code , you see this:

.
(2. If you want to change the setting you have performed
just now, or if you just want to check what you wrote in,
continue the operation from
Point 3 of the Sequence of
operations. )
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
40
20180905-V120180905-V1