Datcon DT9100 I4, Руководство по эксплуатации

Страница: 12 / 64

DT9100 I4
4.3. Mounting as a wall-instrument
Removing the front
cover
In order to remove the front cover, first remove the four
fixing screws as shown in the drawing. A
screwdriver of
appropriate head-size should only be used. Using
screwdrivers with an inappropriate head-size may cause
damage to the screws’ heads or to the instrument front
panel.
Remove the screws by turning them in an anticlockwise
direction as shown in the drawing
Step (1) . The screws are
secured against falling out. After this, you can simply take
away the front cover from the housing
(2) and you can
open the housing by turning the cover downwards (3) .
Plastic ties are used for fastening the front cover to the
housing in order to prevent it from falling down.
12
20180905-V120180905-V1