Datcon DT9100 I4, Руководство по эксплуатации

Страница: 33 / 64

DT9100 I4
Sequence of operations 9. If the codes written in for the first and second time are
identical with each other, the device exits from the menu
item. You see this

on the display.
Do not forget the user code you have specified. If you forget
it, defining another one is possible only by using a
supervisor code for entering into the menu.
Returning into the menu
item Changing the user
code 1. As you have already left the menu item Changing the
user code , you see this:

.
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from
Point 3 of the Sequence of
operations. )
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
20180905-V1
33