Datcon DT1010 Series, Руководство по эксплуатации

Страница: 19 / 40

DT1010 xx xx
20180403-V1
19
7.3. Input mode setting
Function
The instrument has four measuring modes:
• temperature
• potentiometer %
• potentiometer scaled
• resistance
[Factory default: temperature measurement.]
1. Select the appropriate input mode by clicking the button.
The figure shows the factory default setting.
Sequence of operations
•  Temperature transmitter, measured in °C, with
0.1°C resolution [Factory default].
•  Potentiometer transmitter, measured in percent between
0-100%, with 1% resolution.
•  Potentiometer transmitter with scaled output, with
selectable number of decimals (between 1-4).
•  Resistance transmitter, measured in ohm with two
decimal resolution.
Note: before selecting potentiometer mode it should
calibrate the potentiometer. The calibrating means it should
be define the start and the end points of the potentiometers
wiper.