11
4.2 Program Interface
I.
Connection Status
The connection status is displayed at the top right corner of the
program interface. If the PC is connected to the TWP-10 through
USB port, the icon displayed will be . However if you see an
Ethernet port icon , it indicates that the system setup is in IP control mode.
If connection is unsuccessful, you will see the status as
DISCONNECTED
.
II.
Quick Setting Selection
Note
:
Quick Setting Selection
is not available when the input resolution is
4K2K@60Hz.
On this page, you will be able to set up the screen resolution, screen coordinates and split
screen.
First of all, select the TV icon to configure the corresponding screen settings. The output TV
screens are represented by different frame colors and the coordinates displayed below are
the output TV screen position coordinates.
