6
BLUE
Blue only: remove red and green components of input signals. This
allows chroma and phase adjustments. (Phase adjustment is effective
with NTSC signals).
Function
Zoom the SDI-HD video source.
- See
Pixel ZOOM
for more details.
Pattern Button
Display SMPTE 75% Colour Bars.
PIP Button
Activates Picture in Picture Mode.
Menu Navigation
Buttons
Display and navigate setup menus.
- See
Menu Options
for more details.
Aspect Ratio Button
Sets the Aspect Ratio to 16:9 / 4:3
Mute Button
Mutes the audio from the internal speakers or headphone socket.
Volume Control
Adjusts the speaker / headphone volume up / down.
Headphone Socket
3.5mm headphone socket; internal speaker circuit will automatically
mute when headphones are connected.
N.B. Main Power On/Off switch is located on the rear of the TLM-170G.
Pixel ZOOM
This function magnifies the incoming source to fill the screen. This is strictly a ZOOM function
and does not alter the native aspect ratio of the source to fill the screen. When viewing a 4:3
source in ZOOM mode on a 16:9 display, the aspect ratio of the visible video will remain 4:3
though the entire 16:9 screen will be filled.
In order to activate the ZOOM feature, the video source must be in HD mode (resolution above
720p).
Once assigned to the
FUNCTION
button, this feature allows you to toggle the Pixel ZOOM
feature ON/OFF in OSD. When turned on this feature generates a positionable and resizable
rectangle on screen. The rectangle may be moved left or right using the
VOL + /- (ZOOM)
key
and up or down using the up/down key. The
FUNCTION
key can be used to change the size of
the onscreen rectangle.
Using these adjustment keys you can thus select any area on screen and then press the
ENTER
key to zoom to the selected area. This
Pixel ZOOM
feature is designed to work with any
HD
/
SD
signal. A Flashing Tally light or the
FUNCTION
button’s light
will be activated on your monitor
whenever you are in a ZOOM mode. To exit the mode, simply press the
MENU
button. To exit
the
Pixel ZOOM
feature entirely, simply press the
MENU
button again to exit this feature.