Datavideo SE-800, Инструкция по эксплуатации

Страница: 43 / 76

42
Freeze
This effect freezes the incoming video, as selected on the Main Video Source bus.
Simple as that! There are no parameters, no variations. Press the button once, and
the video freezes, press it again, and it returns to the selected source in full motion.
The Freeze effect is single channel, and can work in conjunction with any transition.
MISC
MISC Mode will have more features added
.
Currently you can have more features by
the operation procedures as below:
Strobe effect : Press the “MISC” button
à
01 keys
à
Take button
Black and While video effec t: Press the “MISC” button
à
02 keys
à
Take button
This effect takes a freeze frame of the selected incoming video at one of four preset
rates. Engage the effect by pressing the MISC button and verifying that the LED on
the button is lit, the rate (1 to 4) is adjusted by pressing the SPD key on the Keypad;
the rate is displayed in the Speed window above the Keypad. 1 is the fastest rate
(more frames per second), 4 is the slowest.
This is a single channel effect and cannot be used with any other transitions or effects.
Effects: Mosaic
The Mosaic effect turns the selected Main Source Video into a grid of colored
squares. Engage the effect by pressing the Mosaic button and verifying that the LED
on the button is lit. There are 8 mosaic patterns to choose from; selected by repeated
presses of the up and down buttons. The patterns are represented by numbers 1-8
displayed in the Effects window above the Keypad.
1 = small mosaic blocks, horizontal and vertical
2 = medium mosaic blocks, horizontal and vertical
3 = large mosaic blocks, horizontal and vertical
4 = very large mosaic blocks, horizontal and vertical
5 = very large mosaic blocks, vertical only
6 = large mosaic blocks, vertical only
7 = medium mosaic blocks, vertical only
8 = small mosaic blocks, vertical only
The effect can be applied to the whole image or one of two window sizes, which can be positioned anywhere
on the screen, using the Joystick in Position Control Mode. The size of the effect window is represented by
numbers 1-2 displayed in the Speed window above the Keypad, and may be changed by pressing the UP
and DOWN Arrow buttons beneath the PIP button.
PIP off = the effect is full screen