Datavideo SE-2800, Быстрый старт

Страница: 8 / 25

7
PROGR & PRESET
Picture In Picture can be set up in one of four preset positions, or manually
moved to any position on the screen.
It is possible to overlay titles from external signal in 2 ways, i.e. via Luma
Keying or via Video + a-channel. The input signals used for the titles must
be the same format as the basic output mode (HD or SD). It is prohibited to
apply SD titles signal when the HD is the basic format.
It is necessary to meet the following condition to realize 2 DSK channels:
DSK1 Preview DSK1 Program (titles)
DSK2 Preview DSK2 Program(titles)
SPEED
Selectable of three different speeds for transition effect.
CUT
Change the main/sub source immediately.
TAKE
Take the effect by preset speed.
FTB
Fade to Black is performed upon FTB button stroke only in the Program
Channel. The Button is lights with red color in this case.
The previously pressed button of a signal source for Prgram Line stays with
light on.
There is FTB indication multi screen nearby the Program window.
A repeated button stroke will escape the mode.
When the mode is active, there is Black Field in the Program, but signal
switching is still functional, i.e. it is possible to replace the signal at the
Program output, and there will be a selected source when the FTB is
deactivated.
AUTO
Take the effect by auto speed.
T-Bar
The T-Bar is used to carry out a manual transition such as a wipe, fade, mix
or key. When it has travelled as far as it can go the transition is complete.
For more information, see Calibrating the T-bar
* If you don’t finish calibrating step, the T-Bar may cause incorrect results.
TIME & CLOCK
Select SE-2800 TIMER or CLOCK Functions on the screen.