Datavideo SE-2800, Быстрый старт

Страница: 22 / 25

21
Specification
(SE-2800-8)
Inputs
• Maximum 8 inputs, can be configurable to
1. 8 HD SDI or 8 SD SDI,
2. 4 CVBS, (2 HDMI and 2 HD SDI or 2 SD SDI)
3. 4 CVBS, (4 HD SDI or 4 SD SDI)
Outputs
• 3 BNC output connectors for SDI Outputs
• 2 HDMI for Multiscreen
• RJ-45 for PC Remote controls & Firmware upgrade
• 2 BNC for Sync-In and Sync-Out
• DB-9 for Console
Video Inputs
• HD/SDI: 1920 x 1080i/50, 1920 x 1080i/59.94
• SD: PAL 720 x 576i /50Hz
• SD: NTSC 720 x 480i /59.94Hz
• SD: NTSC 7.5 IRE (US standard)/ 0 IRE (Japan standard) options
• HDMI 1920 x 1080i/50
• HDMI 1920x1080i/59.94Hz
• HDMI 720 x 576i /50Hz
• HDMI 720x480i/59.94Hz
• Y:Cb:Cr, 4:2:2 10 bit
Preview Outputs
• 2x HDMI output
• Way 1:
HDMI 1 Multiscreen1: 9 smaller windows for inputs 1-9 with embedded audio level
indication (group1, channel 1)
HDMI 2 Multiscreen2: 3 smaller windows for inputs 10-12 with embedded audio level
indication (group1, channel 1) + 2 bigger windows for P Program,
embedded audio level indication for Program (group1, channel 1)
• Way 2:
HDMI 1 Multiscreen1- 12 smaller windows for inputs 1-12 with embedded audio
level indication (group1, channel 1) + 2 bigger windows for Preview and Program.
embedded audio level indication for Program (group1, channel 1)
HDMI 2 Multiscreen2 : Program
• Way 3:
HDMI 1 Multiscreen1- 8 smaller windows for inputs 1-8 with embedded audio
level indication (group1, channel 1) + 2 bigger windows for Preview and Program.
embedded audio level indication for Program (group1, channel 1)
HDMI 2 Multiscreen 2 : Program or Multiscreen 1
• Resolution is 1920x1080i
Other Interface
• Serial D-Sub 9 Pin x 1 RS422
• Tally Output D-Sub 25 Pin x 1 12 Channel Open Collector Output
• GPI out
HD SDI signal
SMPTE 292M standard complied with
• Output return loss : More than 15 dB (5MHz to 750MHz)
More than 10 dB (750MHz to 1.5 GHz)
• Output level : 0.8 Vpp ± 10%
• Rise time : Less than 270 ps
• Fall time : Less than 270 ps
• Difference between rise time and fall time within 100 ps
• Alignment jitter : Less than 0.2 UI
• Timing jitter : Less than 1.0 UI
• Eye aperture ratio : More than 90%
• DC offset : 0 ± 0.5V
• Equalizer use 5C-FB cable support 100 meters
CV signal
1.0 Vpp NTSC, PAL
SD SDI signal
SMPTE 259M
Audio
Audio analog and digital inputs outputs:
• analog audio connectors XLR
• input analog level, balanced audio 0dB
• input impedance 10kOhm
• output analog level, balanced audio at impedance 600Ohm 0dB
• digital signal dynamic range for 60Hz mode +20dB
• digital signal dynamic range for 50Hz mode +18dB
• S/N: for analog, digital to analog*** -75 dB or higher
• B/W: 20 ~20K +/- 3dB
• THD:B/W: 20 ~20K < 0.01%
• digital signal sampling frequency 48kHz
• resolution 20bit
Operating Temperature
• 0°C to 40°C (32°F to 102°F)