Datavideo SE-2000R, Быстрый старт

Страница: 6 / 27

5
Video Source
Selecting the Main and Sub Video Sources is the first thing to do when setting up the SE-2000R.
The source you select (by pressing one of the buttons; a bright red LED on the selected button lights for
confirmation) on the Main Source bus is what is sent to the Video output. This means that you can perform cuts
between sources by simply pressing different buttons.
The Sub Source selection determines which input will be transitioned to when using any of the transition controls
and provides the video for Picture in Picture and Chroma Key functions.
Transition Effects
(Reversible)
Right Down to Left High / Left High to Right Down
Right to Left / Left to Right
Top to Bottom / Bottom to UP
Left Down to Right High / Right High to Left Down
Inside Out / Outside In
Middle extend U/D / Middle extend L/R
Controls the border softness of the effect transforming.
Also known as a fade, is a transition wherein all the pixels of one source are replaced by all the
pixels of another, at a smooth rate, and at the same time.
Inverse effect move way.
Press the button once and the video freezes, press it again, and it returns to the selected
source in full motion.