Datavideo RMC-260, Инструкция по эксплуатации

Страница: 24 / 34

24
• Input 4
•
Input 3
•
Input 2
• Input 1
Select “Load” to load the still image to the determined destination.
Image Preview
is available below the “
Load Still
” row. “
Image Preview – 1
” allows the user to preview
the previous image, “ Image Preview ” displays the image that will be loaded when “ Load ” is selected,
and “ Image P 1 ” shows the next image.
Save Still
“ Save Still ” allows the user to save the still image to a specific memory location. The user should
determine the source of the still image first. The available sources are listed below:
•
Input 6
• Input 5
•
Input 4
•
Input 3
• Input 2
•
Input 1
To complete the save, the user can simply select “ Save ” after determining the memory location.
Freeze
“Freeze” allows the user to load an image to Inputs 1-6 from one of the four sources listed as follows:
• Clip
•
Still
• Freeze
• Live
4.9 User Mems
In this option, the user is allowed to load previously saved settings and save the currently configured
settings.
Advanced Mode = Basic Mode
Start Load Mem Memory 1 Load
Keyer
Chroma Save Mem Memory 1 Save
P-in-P
P-in-P Lite
Inputs
Outputs
Stills
User Mems
Setup
Load Memory
Use the up/down arrow to scroll to the desired memory location (1-999) and load the saved setting by
selecting “Load”. The user can also press one of the USER memory shortcut buttons (USER 1-9) on the
control panel as a quick way of loading those previously saved User configurations.