Datavideo PTR-10 MARK II, Инструкция по эксплуатации

Страница: 15 / 40

15
port (LANC/BX-Lens) through a remote cable or via the RS-232/422 OUT port (RS-232/RS-422)
through an RJ-45 cable. For information about the remote cable, see the section on
Remote OUT .
See below for information about RJ-45 cabling (RS-422 wiring scheme between the camera
controller and PTR-10 MARK II) in the RS-422 setup.
Camera Controller (RJ-45 Port) PTR-10 MARK II (RS-422 IN)
GND 1 White/Orange White/Orange 1 GND
NC 2 Orange Orange 2 NC
TX- 3 White/Green White/Green 3 RX-
RX- 4 Blue Blue 4 TX-
RX+ 5 White/Blue White/Blue 5 TX+
TX+ 6 Green Green 6 RX+
NC 7 White/Brown White/Brown 7 NC
NC 8 Brown Brown 8 NC
Please note that bit 4 of the DIP switch on PTR-10 MARK II devices must be set to OFF prior to
establishing physical connection. See the
DIP Switch section for detailed information.
For operations of specific controller, see the relevant user manual.
GND