16
-
On the command prompt, enter
ipconfig/flushdns
followed by
ipconfig/release and ipconfig/renew.
3.2
Web User Interface
By now, we have obtained the IP address of the NVS-34. To open the web user
interface, either double click the device’s IP on the IP finder or enter the device’s IP
into the address bar of a web browser then hit the
ENTER
button. Log in by entering
the username as well as the password into the pop-up dialogue box as shown below.
-
Username: admin
-
Password: 000000
Click
OK
to log in.
Source
You will see the
Source
page immediately after logging into the web UI, on which
first select the video source,
SDI
or
HDMI
.
If you’ve selected SDI, you only need to select the audio source next. The available
audio source options are
Embed
,
Line-In
and
Mixer
. Descriptions of which are
outlined as follows:
Embed: SDI embedded audio
Line-In: External audio from RCA AUDIO IN jacks
Mixer: A mix of SDI and HDMI embedded audio as well as RCA AUDIO IN
Содержание NVS-34
