Datavideo NVS-20, Инструкция по эксплуатации

Страница: 21 / 32

H.264 Network Video Streaming Server
NVS-20
Setting > Firmware update
From time to time Datavideo may release new firmware to either add new
features or to fix reported bugs in the current NVS-20 firmware. Customers
can update the NVS-20 firmware themselves if they wish or they can contact
their local dealer or reseller for assistance should they prefer this method.
This section describes the firmware update process and it should take
approximately 10 minutes total time to complete .
The current NVS-20 settings should be noted. Once started the update
process should not be interrupted as this could result in a non-responsive
unit.
As well as a working NVS-20 you will need:

The latest update file for the NVS-20. This can be obtained from your
local Datavideo dealer or office.

A computer with web browser on the same IP network as the NVS-20.

The current IP address and settings of the NVS-20.
1. Log in with the NVS-20 server as normal using the computer web browser.
2. Click
Setting then turn “Stream OFF” under Stream Server and apply .
3. Select Firmware Update and then Browse to the firmware file.
4. Press Start button to upgrade the NVS-20 firmware.
Note: After the firmware update you may need to locate the NVS-20 on the
network, see page 8. The units settings may also need to be changed back.
21