Datavideo HS-2200, Быстрый старт

Страница: 7 / 40

7
DC Input
Connect the supplied 12V 5A PSU to this 4pin XLR socket.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Mini Switch 2
Firmware upgrade switch (The two DIP switches must be set to
the UP position).
Service Port
This RJ45 Ethernet port is used for updating the HS-2200
firmware, or uploading logo image.
HDMI Multi-View Outputs
HS-2200 is capable of achieving multi-view monitoring by
connecting multi-view monitor to the HDMI port. The HDMI output
can be used for monitoring video and audio in a number of
different configurations.
The HDMI connectors are located on the rear panel.
Note: HDMI multi-view output format is 1080i.
SDI Video Outputs
The five BNC output connectors are user defined SDI outputs.
Each of these SDI outputs has the option to be:
1. Program
2. Program logo free
3. Program logo & titles free
4. Preview
5. Aux1,2,3 or 4
6. Multi screen
Note: Please enter the HS-2200 MENU to set the OUTPUT
SOURCE .
Video Input Modules
The HS-2200 is equipped with six video input channels.
Video Input set is comprised of six SDI connectors and two HDMI
ports. The last two channels (#5 and #6) can be switched between
SDI connector and HDMI port, i.e. the user is allowed to use CH5
and CH6 for either a SDI source or an HDMI source.
Note: The CG (picture and animation) data source via
HDMI cable connect to the HS-2200 channels 5 and 6.
Can edit CG function from the PC.
Note: Please enter the HS-2200 MENU to set the input
source for INPUT 5 AND 6 MODE .