Datavideo HS-2200, Быстрый старт

Страница: 12 / 40

12
FNUCTION (F1~F4)
TBD
PIP Preview and PIP Program
When looking at the top right corner of the HS-2200 Control Panel / Keyboard there
are four PIP keys. These are labelled Program and Preview. The upper PIP1 and
PIP2 keys relate to activating Picture In Picture images on the Program outputs.
The lower PIP1 and PIP2 keys relate to activating Picture In Picture images on the
Multi-view or Preview outputs.
For more detail, please see the Picture in Picture Function .
DSK Preview and DSK Program
When looking at the top right corner of the HS-2200 Control Panel / Keyboard there
are two DSK keys. These are labelled Program and Preview. The upper DSK key
relate to activating Down Stream Keying on the Program outputs. The lower DSK
key relate to activating Down Stream Keying on the Multi-view or Preview outputs.
Please see the DSK Function (page 27) for more details.
LOGO 1
The LOGO 1 and LOGO 2 buttons are used to display pre-selected logos on the
HS-2200 Preview and Program outputs. When the button is active the selected logo
is shown. These logos are selected from the switcher’s memory and positioned
using a menu option.
LOGO 2 or CLOCK
The user cannot display LOGO 2 and CLOCK at the same time. Instead use LOGO
1 and CLOCK together or use LOGO 1 and LOGO 2 together.
FTB
Fade To Black, this button fades the current video program source to black. When
pressed again it acts in reverse from complete black to the currently selected
program video source.
SPEED
There are three speed buttons which can be defined by the user. By pressing a
speed button the user is choosing the rate of transition or time taken when using the
AUTO TAKE button.
Note: Please into the HS-2200 MENU selects CONSOLE SETTINGS to setup
SPEED BUTTON SETTING .
WIPE
The WIPE button is selected when a wipe effect transition between the selected
Program and Preset sources is required. This WIPE effect is produced by then
moving the T-Bar manually or by pressing the AUTO TRANS button.