Datavideo HS-2200, Быстрый старт

Страница: 13 / 40

13
CUT
This performs a simple immediate switch from the current main source to the
selected sub source. The selected transition wipe or MIX is not used.
AUTO TAKE
This performs an automated switch from the current program source to the selected
Preview source. The selected transition wipe or MIX will also be used. The timing of
the transition is set by the chosen Speed button.
MIX
Pressing this button selects a basic A/B Dissolve for the next transition.
FREEZE
Freeze the program source image or return to live video of the selected program
source.
T-Bar
This performs a manually controlled transition from the current program source to
the selected Preset source. The selected transition wipe or dissolve will be used.
When the T-Bar has travelled as far as it can go the transition between sources is
complete. The T-Bar has indicators next to it which light when the transition is
complete.
The T-Bar can be operated in one of two modes which are chosen by a menu
option.
TIMER
In some mixing or switching applications it is useful to have a countdown timer. It
could be that the input is a pre-recorded video clip and you need to know when to
be ready to switch away from it.
This countdown timer function is only seen in the status area of the HDMI multi-view
output to the right of the normal Clock function. The timer can be selected for one
input channel, several channels or all channels.
When the TIMER button is active and the user switches to a selected input channel
the countdown starts on the HDMI multi-view.
The value of the countdown, in minutes and seconds (MM:SS).
When the countdown reaches zero the user can then switch or transition to another
input channel. If the countdown reaches zero the switcher will not automatically
change to the selected Preset source.
Set up the Countdown Settings
1. Select one channel of PRESET CH1~6
2. Press MENU key into ON PREVIEW SETTING to set up the COUNT DOWN SETTING .
3. Press ENTER key to save your setting, and then exit the MENU Mode.
4. Press TIMER key, and then select one channel of PROGRAM CH1~6 (same as step 1 channel setting).