manualshive.com logo in svg

Datatech Enterprises 386/25, Руководство пользователя

Поделиться
Скачать
Datatech Enterprises 386/25 Скачать руководство пользователя страница 2

KEEN-2530

Personal Computer

User’s Manual

Edition 1.2

The following does not apply to any country where such provisions are inconsistent
with local law:

We make no warranties with respect to this documentation either express or implied
and provides it “as is”. This includes but is not limited to any implied warranties of
merchantability and fitness for a particular purpose. The information in this document
is subject to change without notice. We assumes no responsibility for any errors that

may appear in this document.

IBM PC, IBM PC/XT and IBM PC/AT are registered trademarks of International
Business Machines Corporation. MS-DOS is a registered trademark of Microsoft
Corporation. Intel is a registered trademark of Intel Corporation. The typeface used
in the text of this manual is Helvetica and is used under licence from the Allied
Corporation, the owner of the typeface.

All other brand names are registered trademarks of their respective companies.

The KEEN-2530, this manual and all illustrations in it are copyrighted with all rights
reserved. Under the copyright laws, the KEEN-2530, this manual and the illustrations
may not be copied without the written consent of Datatech Enterprises Co., Ltd.

Documentation design and writing by: Echo Chen, Patty Lee, Hazel Chen, and Alan
Patterson.

© 

1991 Datatech Enterprises Co., Ltd.

Содержание 386/25














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды