manualshive.com logo in svg

Datatech Enterprises 386/25, Руководство пользователя

Поделиться
Скачать
Datatech Enterprises 386/25 Скачать руководство пользователя страница 137

data

— Any kind of information. However, this word is generally

used to describe computer-related information.

debug

— A method for correcting computer errors.

default

— This is an existing setting in a computer.

DIP

— This is an acronym for Dual In-line Package, which is a

method for packaging integrated circuits.

directory

— A directory works like a desk drawer to keep files. It

contains not only your files but also the information on the

size of the file and the dates they were created and up-
dated. It is always good to organize all the related files in

the same directory.

diskette

— This refers to removable data storage disks, sometimes

also called floppies or floppy disks. Diskettes generally
come in two sizes: 5.25” and 3.5”.

disk drive

— A device that stores and retrieves data.

display

— The information/graphics visible on the monitor screen.

DOS

— Disk Operating System.

This is a set of commands is

used to control the operations of a computer and its
peripheral components.

DRAM

— Dynamic Random Access Memory. This type of RAM

chip differs from Static Random Access Memory (SRAM).

Chapter 7: Glossary

3

Содержание 386/25














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды