DATASONICS PSA-916, Руководство пользователя, Страница: 14 / 26

3-3 DATASONICS
User’s Manual March 1997
*To select RS-232 Output install a jumper between JP3 pins 1 & 2. To select Error
Output install a jumper between JP3 pins 2 & 3.
Figure 3-1 Connector view, looking at the PSA-916
3.2.2 RS-232 Output
The RS-232 output is set to the following parameters:
Baud:1200,2400,4800, or 9600 user selectable
Number of Data Bits:8
Number of Stop Bits:1
Parity:none
On power up the following banner message will be output:
“Datasonics PSA-916 V1.2"
Where the number following the V is the firmware version.
The serial output will be in the following format:
Rxx.xx<cr><lf>
1
5
4
3
2
6