DATASONICS PSA-916, Руководство пользователя, Страница: 12 / 26

3-1 DATASONICS
User’s Manual March 1997
Section 3. Setup and Deployment
This section provides information on unpacking, installation and general
operation of the PSA-916.
3.1 Unpacking and Disassembly
As with any sophisticated electronic equipment, Datasonics' products
should be handled with a reasonable amount of care when unpacking,
transporting or storing.
When shipped from the factory, the units are packed in weatherproof
cartons. Every effort is made at the factory to pack the equipment so as
to protect it during shipment and to minimize the effect of any
mishandling.
Carefully inspect each instrument for physical damage as it is unpacked.
Report any damage to the freight carrier and to the Datasonics sales
office, at the number listed below. Store the shipping cartons and packing
materials in a cool, dry place for later use in system transport.
The unit is shipped completely assembled and internally configured.
Should an internal inspection be deemed necessary, the unit can be
opened by turning the delrin closure ring counterclockwise. The
transducer and electronics should slide easily from the pressure case.
Caution is advised as the electronics is connected to the interface
connector at the opposite end of the pressure case.
NOTE -- A double O-ring seal is designed into the pressure case/end cap to
protect the electronic components from moisture. A failure of these
seals will result in the unit flooding and subsequent loss.Whenever
the unit is disassembled, carefully inspect the O- rings for cracks,
tears, and proper fit. Replace any damaged O-rings. The end cap
O-ring grooves and housing O-ring mating faces should also be
checked for tool marks or abrasions.